Wall Spice Rack Plans
Free Kitchen Spice Rack Plans

Free Plans Chainsaws |   Rod's Woodshop  |  Home

Free Spice Rack Plan

Check Out The Plans Below!

Build the Spice Rack plan shown on the right with just a few tools using scraps laying around your shop!

Click on image for larger view

Building a Spice Rack is a project that can be fun and practical.   This simple, but handy spice rack can hold many different sized bottles and will provide years of service.  You can build it practically for free with the materials laying around your workshop; I used some 1/4" plywood, and a 1x4 left over from a building project. 


Material List:

(1) 13 1/2", 1 x 4 for the Bottom.

(1) 3/8" x 13 12" solid wood piece, for the Front Panel.

(1) 1/4" plywood; 16 1/2" x 5 1/2" for the Back Panel and Side Panels.

1" Nailing brads and glue.

Step 1, Cut the Spice Rack Pieces -

Select the 1 x 4; Rip it to 2 3/8"; crosscut it to 13 1/2" for the Bottom Panel. 

Select 1/4" plywood; Rip it to 5 1/2"; crosscut it to 13 1/2" for the Back Panel.

Select the 3/8" hardwood; rip it to 2 1/2"; crosscut it to 13 1/2" for the Front Panel; crosscut two pieces @ 3" for the two sides.

Step 2, Assemble the Rack - Select the front, back and bottom pieces; attach the Front and Back Panels to the Bottom with glue and brads, as shown above.

Select the two Side pieces; Attach them with glue and brads, as shown above.

Counter sink all the brads, use a filler to fill all the holes, sand, prime, and paint/stain to suit.  Replicate the process for the number of racks desired; attach the Spice Rack to the desired location; now you are ready to place those spices where they are easy to access.

Free Spice Rack Plans by:  WayneOfTheWoods@yahoo.com

Free  Picnic Table Plan Click Here!

More FREE Plans!
Picnic Table Plans
Gun Rack Plans
Bookcase Plans
Bird Feeder

Free Spice Rack Building Plans by:  WayneOfTheWoods@yahoo.com